User Manual of Semi-automatic washer extractor 15kg 20kg 25kg--4

Spinning or not when spinning automaticly.When it is effective,the LED light will be bright,non-effective,it will be off;

(10) MEMORY:Setting state is effective,save changing parameters; Non-operating and non-setting sate press this key for 3 seconds,could make parameters be original.(Att:after pressing the key for 3 seconds,the controller should enter into the state of resting)

(11) WASH:Choose washing speed,three speeds.press WASH ▲,the washing speed will be higher;press WASH ▼,the washing speed will be lower.When in the state of setting,could adjust water entry’s time.

(12) SPIN: Choose spinning speed,three speeds.press SPIN ▲,the spinning speed will be higher;press WASH ▼,the spinning speed will be lower.When in the state of setting,could adjust temperature.

(13) MANUAL:Manual switch key. Non-operating automaticly and non-setting sate press the key,will enter into manual operating state,the LED light on the key will be bright;Press again will quit manual state,LED light will be off,meanwhile close all the outputs.

(14) COLD: Manual switch key.Effective when it is operating and LED light will be bright;

(15) WASH: Manual switch key.Non-effective when it is spinning and LED light will be bright, positive and negative running press:

→25 seconds(P) → 5 seconds(S) → 25 seconds(N) → 5 seconds(S)——

  ︱                                                               ︱                                                           

P:Positive  N: Negative  S:Stop

Washing output is according the choosing speed output:

(16) HOT: Manual switch key.Effective when operating and the current temperature is lower than setting time.Then the LED light will be bright,open hot water:close when reach setting temperature:

(17) POLYSTER: Manual switch key.Effective when manual state,non-effective when spinning oil.When effective,the LED light will be bright, positive and negative running press:

→10 seconds(P) → 5 seconds(S) → 10 seconds(N) → 5 seconds(S)——

  ︱                                                               ︱

P:Positive  N: Negative  S:Stop

Out put speed is the same as washing.

(18) STEAM: Manual switch key. Effective when manual and the current temperature is lower than setting one.Then the LED light will be bright,Open steam;close when reach the setting temperature.

(19) SOAP: Manual switch key.Effective when manual state,non-effective when spinning oil. When effective,the LED light will be bright and output is positive all the time,output speed is the same as washing.

(20) DRAIN:Manual switch key.Effective when manual state. When effective,the LED