Publish Time: 2017-06-26 Origin: Site
Chapter Five Maintenance
1 To keep the circumstance clean where machine kept
2 Making sure steam inlet pipe and water exhaust pipe are in good condition before using it
3 After pressing button and starting motor , and machines will turn back and forth
4 The shell of the machine must be connected to the ground during installation
5 If something abnormal happens , stop machines in time to check what is the trouble with the machine and repair it
6 Machine needs maintenance every half year , including add enough lubrication to bear
Chapter Six Trouble Shooting
1.sensor fault : When the measured temperature is over 120°C , the controller will display “EE “,when the sensor open circuit , please check the senor or setting time , or replace the sensor
2.equipment without electricity : when Rd fuse is broke , the machine is over load , replace a relay , and take out some leather inside the machine to release the machine
Chapter Seven Installation Photo