Publish Time: 2017-06-26 Origin: Site
Chapter 3 Keys of Controller
(1)start
if press this button , the light above will be green ,and the machine will run according to the original data or setting data
(2)stop
machine stops and returns to original condition <o:p>
(3)set
a .accomplish time setting together with add key and reduce key
b .pressing this button the first time , drying time light twinkles , to set the drying time with add key and reduce key
c. pressing this button the second time ,drying temperature light twinkles , to set drying temperature with add key and reduce key (0
d. pressing this button the third time ,cooling time light twinkles , to set cooling time with add key and reduce key (0
e. Pressing this button the fourth time ,all data is saved , even the electricity is cut off
(4)add key and reduce key
to adjust data in the condition of setting .
adjust roughly : press the key without release ,it will add or reduce 10 words in 0.6 seconds
precise adjust : press the key in 0.6 seconds interval , it adds or reduce 1 word per pressing
Chapter Four Output Keys of Controller
1.when the measured tenperature is lower then the setting data during drying , the drying light will be red , heater 1 , heater 2 will work at the same time
the heater 1 doesn
3.stop
If open the door during the machine