Ironing Machine

Ironer, ironing machine, flatwork ironer, Ironing machine for bed covers, ironer for bedsheet, ironer for hotels and hospitals
This is one type of ironer to iron bed covers, bed sheet, table covers, and towels.
This ironer can be heated by electricity or steam
Feature
1. High quality ironing result.
The precise structure of double chests, springs and heating proof felt ensure the rollers to keep enough eleacticity and spring cushion, which creats the surface well-touched.

Uique lever balance pressure device and the cylinder pressure adjust system on both sides.

Unique whirl steam flow heating system for the connecting plate improves the ironing result.

2. Reliable and safe operation system
With a fingerguard, once operator touchs the plate the machine will stop immediately.
Anti-curliness device can prevent the fabrics curling in the chests.
With steam and compressed air control system, once the pressure is too low the system will alarm.
Many emerency stop buttom fixed on the ironer. Any buttoned pressed, the ironer will stop to run.
The pneumatic system can raise and lock up the rollers to prevent the fabrics and the proof felt damaged when the machine stops running in case of no power.
A big touch screen controller with interactive interface on the machine is easy for operator to program according to different requirements.

3. High efficiency and Low energy consumption
The chests have a large angle heating surface, which can improve the heating efficiency.
The ironer adopts a single drive motor which can save energy. The frequency converter system can adjust the ironing speed from 8~40 m/min with the change of temperature, type of fabrics, moisture, etc.
The chests adopt a unique heating chamber recycle system with many strips on double sides. Steam can flow in the chamber with high efficiency. In addition, the chests are covered by thermal insulators to reduce heat losses.