150KGS WASHER EXTRACTOR
model | XG0-150F |
Rated capacity (on load) kg | 150 |
Liner D×L mm | Ø1482*997 Ø1470*886 |
Laundry tub D*L | Ø1560*1080 |
Motor power kw | 22 |
Washing speed rpm | 32 |
Uniform speed rpm | 65 |
Medium speed dehydration speed rpm | 350 |
High speed dehydration speed, rpm | 700 |
Yanqi pipe diameter mm | DN32 |
Diameter of cold and hot water pipe mm | DN50 |
Outer diameter of drain pipe m | DN125*2 |
Water inlet pressure Mpa | 0.2-0.3 |
Steam pressure Mpa | 0.4-0.6 |
Compressed air pressure Mpa | 0.4-0.5 |
Water consumption per vehicle kg | About2000 |
Standard washing time min | 45 |
Gas consumption per vehicle kg | 80 |
Spare air compressor ㎥/min | 0.13 |
Power three-phase four-wire system m㎡ | 10 |
Discharge method | The material can be tilted, and the tilting angle is less than 15 degrees |
Dimensions (W*D*H) mm | 2070*2450*2300 |
The weight of the whole machine is about kg | 4500 |
Power V/Pn/Hz | 380/220 3+1 50 |
1. The high-power steam radiator is made of copper tube and aluminum sheet. Fully enclosed safety cover with wheels to ensure safety.
2. The high-power fan matches the high-power heater, and the power considers energy saving.
Item | Name | Specification |
1 | Washer Extractor Type | Vertical Type Front Loaded with one door Steam heated or Built In Electricity heater |
2 | Operation panel and Programs | Programable Operation panel with unlimited programs brand Pump |
3 | Rated Capacity (Wet )KG | 50KGS-55KGS |
4 | Washing Drum , Inner dru and shell | Stainless steel SS304 |
5 | Shell Thickness | δ1.2 |
6 | Washing Chamber thickness | δ2.0 |
7 | Inner Drum thickness | Δ2.0 |
8 | Drum size DÍL mm | φ1080Í610 (550L ) |
9 | Shock reducing system | Shock absrober and 4 spring |
10 | Motor | Ford Frequency motors 5.5kw |
11 | Bearing | TWB 22222-22220 |
12 | Invert | Invert 7.5kw |
13 | Water consumption (kg/1 time wash hand 2 times bleaching ) | 500 |
14 | Steam consumption | 50KG |
15 | Electricity consumption Kw.H | 3KW(Electricity heating power 24kw) |
16 | Washing /Balancing speed rpm | 30/60 |
17 | Middle/High extract speed | 350/700 |
18 | Steam port size and water inlet port size | DN25-DN40 |
19 | Overall Dimension (WÍLÍHmm) | 1560X1780X1880 |
20 | Main power line | 2.5-16平方(3+1) |
21 | Weight | 2000KG |