Views:0 Author:Site Editor Publish Time: 2017-06-26 Origin:Site
speed,effective drain and noneffective supplying water;After the key is effective,close low speed instructing light,close heating,high speed light will be twinkling(means there are requirement for high speed extracting).After positive running with low speed for 22 seconds,press high speed extracting,the light of high speed extracting will bright,port of 2.4 output(Speed 1),in 90 seconds,port of 2.5 output(Speed 2);After high speed extracting is effective,press low speed,heat,water and drain will be noneffective;
(7) Heat:This key is effective only when high speed extracting is noeffective but there are water level single,press this key,the LED light will bright,open heating;Press again,the LED light on the key will be off,heating is closed;When the machine stops,press this key and press low speed key together,will come into low speed running time setting when heating;
(8) Water:It is noneffective when high speed extracting;
(9) Drain:It is noneffective when high speed extracting.
3. Parameter setting
Non-running state,press low-speed key,the light on low-speed will bright,meanwhile the digital pipe will be twinkling in the area of time unit.Now can press ▲,▼ keys to change parameter figures,range is 1-99,press low-speed key again or running key again or wait for 5 seconds,will get out of setting state,parameter figures will be saved automaticly.
Non-running state,press high-speed extracting key,the light on high-speed extracting will bright,meanwhile,the digital pipe in time area will be twinkling,.Now can press ▲,▼ keys to change parameter figures,setting interval is 10 seconds,range is from 90 seconds to 10 minutes.Press high-speed extracting key again or press operation key or wait for 5 seconds,it will exit and the parameter figures will be saved.
Non-running state,hold pressing heating key,then low-speed key,the light on heating and low-speed will bright,Now it comes into time setting,meanwhile,the digital pipe will be twinkling in the area of time.Press ▲,▼ keys can change the parameter figures,range is from 1 minute to 99 minutes.Hold pressing heating keys,then press low-speed key or operation key or wait for 5 seconds,it will exit and the parameter figures will be saved.
Press ▲,▼,the digital pipe in temperature area will be twinkling,it means now coming into state of temperature setting,now you can press ▲,▼ keys to set parameter,range is from 35 to 90;do not press ▲,or ▼ key for 1 second or press operation key,it will exit and the parameter figures will be saved.
(1)The time area will display the running time,if there are two or three output