Views:0 Author:Site Editor Publish Time: 2017-06-26 Origin:Site
together among low-speed,high-speed extracting and heating,now it displays according to the priority among them;the temperature area will display current temperature.
(2) Malfunction solving
During running period,when the signal of “overload” happens,the machine comes into malfunction solving.
When overloading,the light of overloading will bright,close all output,display “E”,the buzzer alarms,now could press stop to eliminate it.
(二) Automatic operation instruction
1. Panel display
12 units digital pipe displaying,top left 4 displays total working time,right 2 displays working temperature;the behind 7 units,from left to right separatly displays washing time,rinsing time,washing times,spinning time;above the total working time area there are one line lights,left is washing speed display,right is spinning speed display;the left line lights are instruction for each precedure;there are one operating instruct LED on each key(program selecting,release malfunction, modification,program transferring,memory,washing selecting,spinning selecting,except ▲ and ▼ keys).
2.Definition for keys
(1) POWER: After starting,press this key will quit resting sate and enter into working state,the LED light on this key will be bright;press this key again during non-operating state,it will enter into resting state,the LED light on this key will be off;
(2) PROGRAM SELECT: Non-operating and non-setting sate press this key,select one of the five auto programs;when running automaticly press this key,could pause automatic program running;
(3) START/STOP: Non-operating and non-setting sate press this key,will enter into automatic program running,the LED light will be bright;Press again,will stop automatic program running,the LED light will be off;
(4) RST: Press this key,it will enter into resting state and restore;
(5) WATER LEVEL: Null;
(6) SET: Non-operating press this key,will enter into the state of automatic programm changing; press again,null;
(7) SELECT: In the state of setting,press this key,could switch among washing time setting,rinsing time,rinsing times and spinning time. Non-operating and non-setting sate press this key,could set the current washing time to be 0;press again,could set rinsing time to be 0;press again,then alll the parameters will recover to the original one;
(8) ▲, ▼:When setting,press this key could make the setting number increase or decrease,hold pressing,the number could be increased or decreased automaticly.
(9) M SPIN:Setting state is effective,could choose wther there are Middle Speed