Views:4 Author:Site Editor Publish Time: 2017-06-26 Origin:Site
Introduce of industrial washing machine
1 such machines are applied in horizontal type ,and the inner drum all made of stainless steel ,and they are eroded proof ,so the machines never be hurt the textile that washed by them.
2 such machines are Safe for the operator because there are incorporated lock on the inner door ( the door of the cylinder)and electronic interlock on the shell door .If the doors are not closed properly ,the machines are disable to start , besides the machines will stop as soon as the doors being opened during the machine’s running to ensure the safety of the operators
.chapter 2 User Manual of industrial washing machine
1 Open the shell door and inner door , put the textile into machine in equality ,then close the inner and shell door .
note:The textile can not be too much or too little ,otherwise it would effect the efficiency and the quality of the washing
Make sure all locks being locked properly in case of a accident
2 Open the water inlet valve until the water level reach the request ,then open the steam inlet valve till the temperature of the water is proper(the temperature of water for cotton is usually form 60 centigrade to 70 centigrade ,temperature of water for man made fiber and silk is form 30centigrade to 40centigrade )
3 Add proper chemical powder or liquid of washing , turn on the switch (on the operating panel ) to manual position , to control the drum ( mainly the cylinder for washing )
4 Turn the switch to auto position , the machine will run automaticly
5 After washing ,open the outlet valve to let the dirty water go out
6 Let some clean water in once again,and repeat washing for two or three times
7 After cleaning , let the water go out and stop the machine .if the inner door does not face to the outer door , turn the switch to manual position,and adjust it
8 cut off the power , open the inner door and shell door ,take out the clothes .